Shanghai Reach Industrial Equipment Co., Ltd.
Shanghai Reach Industrial Equipment Co., Ltd. Forklift, Stacker, Pallet truck, Tow tractor, Oder picker, Lift table, Spare parts
Add to Cart
Brief introduction:
＞ Load capacity: 1500kg
＞ Max. lifting height: 190mm / 200mm
＞ Height of tiller in drive postion, min./max.: 700mm / 1250mm
＞ Turning radius: 1424mm / 1454mm
＞ Battery voltage, nominal capacity K20: 24V/65Ah
Product specification:
| SPECIFICATIONS | ||
| Model | CBD15W-E | |
| Load capacity | kg | 1500 |
| Fork height, lowered | mm | 85/75 |
| Tyre size, front | mm | 195*70 |
| Tyre size, rear (single) | mm | 80*93/74*93 |
| Tyre size, rear (double) | mm | 80*70/74*70 |
| Max. lifting height | mm | 200/190 |
| Height of tiller in drive position min./max. | mm | 700/1250 |
| Overall length | mm | 1654/1724 |
| Length to face of forks | mm | 504 |
| Overall width | mm | 685/562 |
| Fork dimensions | mm | 53/160/1150(1220) |
| Width overall forks | mm | 520/550/685 |
| Aisle width for pallets 1000*1200 crossways | mm | 1854/1924 |
| Aisle width for pallets 800*1200 lengthways | mm | 1904/1924 |
| Turning radius | mm | 1454/1424 |
| Travel speed, laden/unladen | km/h | 4.3/4.8 |
| Battery | V/Ah | 24/50 |
| Service weight | kg | 205 |
Advantages:
1). CBD15W-E uses floating balance wheel, which prevents the side swing of the truck when travelling and have great anti-vibration.
2). The balance wheels can be removed easily, easy to maintain.
3). The integral structure of rock arm mechanism which improves the strength effectively, meanwhile, share and adjust the even force from the fork and reduce the obvious deflection in fork height after a long use and when loading.
4). The drive wheel of CBD15W-E is using horizontal type structure which makes the layout position of the motor higher off the ground to prevent the water & dust and greasy dirt gluing on the motor effectively and improve working condition of the motor.
5). CBD15W-E is equipped with a height limit switch. Cut off the lifting circuit when lifting height approaches the highest point to disconnect the power of the hydraulic power unit to prevent the noise from the spillover of the hydraulic station and save the energy caused by spillover.
